Primi passi con la Sony Qx10

Da ieri felice possessore della QX10, per abitudine uno dei primi aspetti che vado a verificare è l’aggiornamento del firmware, spesso molto importante per risolvere eventuali problemi prima di incontrarli.

In questa pagina vengono pubblicati gli aggiornamenti firmware ed i manuali d’uso:
http://www.sony.it/support/it/content/cnt-dwnl/prd-dime/sony-dscqx10-firmware-update-ver02-win/DSC-QX10

La versione installata era la 0.1, disponibile online la 2, un salto temporale quindi che sicuramente non può che aver introdotto qualche differenza.
L’aggiornamento è davvero semplice, dalla pagina linkata poco sopra si procede con il download del file, si collega la fotocamera al pc , win o mac, e si lancia l’applicazione.

Continua a leggere “Primi passi con la Sony Qx10”

#PhotoAcademy.. Parte seconda

Prima di ogni occasione o evento ci si fa un’idea di cosa aspettarsi, un po’ basata sulla tara di esperienze passate ed un po’ su quanto ci piacerebbe trovare..
Questa sera è stata una di quelle occasioni in cui ciò che ti aspetti è fortunatamente diverso da quello che trovi, riassumerei tutto nel concetto dello stupore, in senso positivo ovviamente, l’aspetto commerciale per quanto indispensabile ed ovvio è stato calibrato nel contesto in modo da non appesantire ed annoiare ma nel fornire piuttosto il supporto alla curiosità ed alla voglia di conoscere i nuovi prodotti di ognuno dei partecipanti.
C’erano i corpi macchina di ogni fascia ed una discreta disponibilità di ottiche da provare.
La parte teorica offerta da Novelli si è basata prima su un confronto di idee e poi mostrando lavori veri, alcuni puramente commerciali, ciò che gli dà da vivere ed una parte in cui si è parlato di ciò che c’è alla base di tutto.. La reale passione per l’immagine, che sia prodotta da una fotocamera professionale da un cellulare o da altri device, qualità del fine quindi e non del mezzo utilizzato per ottenerlo.
Al termine la scelta tra scatti in studio, e questo era uno degli aspetti che avevo messo in previsione e quella di uscire per le vie di Milano a fare qualche scatto in compagnia sfruttando ovviamente il corredo Sony a disposizione dei partecipanti.
In diversi abbiamo preferito uscire, per stimolare un po’ la sana curiosità ed è stato divertente, peccato solo che, come Cenerentola, la mia Metro mi attendeva prima della mezzanotte..
Approfitto di queste righe per un saluto ed un ringraziamento a tutti gli organizzatori, dai ragazzi di Sony a Novelli e collega.
Spero ricapiti qualcosa di simile..

Buonanotte.

Configurare un Blackberry Z10 con IBM Lotus Traveler 8.5.3

BlackBerry Z10

La versione 9 del Traveler è direttamente compatibile con lo Z10 quindi si potrà installare il profilo di sincronizzazione in automatico, per quanto riguarda invece la versione precedente 8.5.3 bisogna procedere ad una configurazione manuale.

(se avete sono problemi nel comprendere la traduzione avvisatemi nei commenti).

  1. Open the “Setup” application on your Blackberry Z10
  2. Under the “Get Connected” section there is an icon labelled “Accounts“. Tap this.
  3. A menu at the bottom of the screen is shown. Select the “Add Account” option
  4. The “Add Account” screen is shown. On the menu at the bottom of the screen tap the “Advanced” option
  5. The “Advanced Setup” screen is shown. Tap the option “Microsoft Exchange ActiveSync
  6. The “Add Account” form is displayed.
  7. Description. Whatever you type here will be seen on your Blackberry Hub
  8. Leave the “Domain” field BLANK
  9. In “Username” – enter your iNotes user name
  10. For “Email Address” enter you notes SMTP email address
  11. For “Password” enter your iNotes password
  12. In “Server Address” enter the public URL of your traveler server
  13. In “Port“, enter the port that traveler will use. We configured “443” in our system
  14. If using SSL then turn on the SSL option
  15. If using a VPN then turn on the “Use VPN” option
  16. Ensure that you turn on “Push
  17. Leave “Sync Timeframe set to 30 days
  18. At the top of the screen click the “Next” button

The handset will attempt to synchronise with your traveler server and you will get a message saying “Checking for support services and policy information“.
Behind the scenes traveler will create a profile for you.
You may get some messages about https certificates.
If you do click “Continue” past those.
At the next screen entitiled “Add Account” specify what things you want to syncrhonise (Sync Emai, Sync Contacts, Sync Calendar, Sync Tasks, Sync Memos) then on the top of the screen click the “Done” button.
You will get the message “Saving and verifying your settings”.
Again you may get a “Provider Identity Not Verifiable” message if there is an issue with https certificate again, click “Continue”.

Sony Xperia Z2

Da felice possessore del modello Z1 sono interessato alla nuova versione. Non aver modificato la fotocamera ne dimostra il livello qualitativo, ci sarà quindi ancora più supporto software per sfruttarla al meglio.

Qui un riassunto delle specifiche tecniche:

  • Qualcomm Snapdragon 801 2.3 GHz quad-core processor
  • Android 4.4 KitKat
  • 3GB RAM
  • 16GB storage, MicroSD support up to 64GB
  • 5.2-inch Full-HD (1920 x 1200) TRILUMINOS display
  • 20.7 MP 1/2.3-inch Exmor RS for mobile CMOS sensor
  • 4K video recording (3840×2160 pixels/30p)
  • 2.2 MP front camera
  • Dust-resistant and waterproof (IP55 & IP58)
  • NFC
  • 3200 mAh battery

Samsung Galaxy SIII aggiornamento alla 4.3

Sul sito SamMobile sono disponibili due firmware per i paesi Irlanda e Svizzera, per quello italiano bisogna attendere oppure procedere con l’installazione manuale tramite il programma Odin.

Model: GT-I9300
Country: Ireland (Vodafone)
Version: Android 4.3
Changelist: 1902166
Build date: Sat, 26 Oct 2013 03:29:22 +0000
Product Code: VDI
PDA: I9300XXUGMJ9
CSC: I9300VFGGMJ5
MODEM: I9300BUUGMJ3

http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware

Rom Android 4.2.2 per Samsung Galaxy SIII (S3)

Dopo alcuni giorni di utilizzo trovo che questa versione (Samsung, quindi non di terze parti), anche se non ancora ufficiale, sia stabile e ben ottimizzata, non mi ha dato problemi di blocchi o riavvii, oltre alle nuove funzionalità introdotte dalla 4.2.2 si nota anche una evidente miglioria nella durata della batteria.

L’installazione è semplice, basta mettere il cellulare in modalità download e caricare il file PDA con Odin.

Codice: I9300XXUFME7_I9300OXAFME7_OXA (facilmente recuperabile da internet)

In caso di problemi discutiamone nei commenti.

Android 4.2.2 Jelly Bean leaked firmware for the Galaxy S III

E’ disponibile un nuovo firmware per lo smartphone Samsung Galaxy SIII (S3), vengono introdotte delle novità prese dal nuovo S4 e portata la versione di Android dalla precedente 4.1.2 alla 4.2.2.

La rom è in fase di test quindi non ancora definitiva, viene però descritto nel post che è funzionale al 100% come le altre: “We have fully tested this firmware and this firmware works perfectly as any other official firmware.”

Non essendo una distribuzione ufficiale l’installazione quindi non è possibile tramite Kies ma occorre passare da Odin per l’aggiornamento manuale: This is a pre-release firmware and not official from Samsung.

Qui è disponibile un video delle novità della versione:

New enhancements in Android 4.2.2 update

  • Android 4.2.2 – Build ID: JDQ39
  • New S4 Lockscreen: Multiple Widgets, two Unlock effects (Ripple and Light), improved ripple effect than Android 4.1.2, ability to change clock size and set a personal message
  • New Screen modes (From S4): Adapt Display and Professional Photo
  • Daydream
  • Driving mode
  • Actionable notifications
  • New Additions in Notification Center
  • Completely revamped Settings UI (Tabbed interface – Exactly like the S4)
  • Addition of Voice controls (Let’s you control various parts of the phone using voice commands – Galaxy S4 feature)
  • Gallery modes have white background (When changing gallery modes to 3D the background changes to white)
  • Full screen Samsung apps
  • New S-Voice (from S4)
  • New smart switch widget

Firmware Details

Android Version: 4.2.2 – JDQ39 (Jelly Bean)
PDA: I9300XXUFME3
CSC: I9300OJKFME1
MODEM: N/A
Region: Middle East
Carrier: Branded
Changelist: 611730
Build Date: 8 May 2013

Download della rom:
http://www.easybytez.com/qun3p938y0dl

Fix Pack 4 per IBM Lotus Domino e Notes

Dal 15 aprile sono disponibili sul sito Fix Central di IBM i file di aggiornamento FP4 per la piattaforma Lotus Server e Client.

Per il server Domino c’è distinzione tra 32 e 64 bit mentre per il client è solamente 32 bit (in versione standard con Eclipse o basic).

Oltre a questi aggiornamenti è disponibile anche la IF2 per la versione 8.5.3 Up2 di Lotus Traveler (sincronizzazione Mobile per Smartphone e Tablet).

Link al supporto Fix Central:
http://www-933.ibm.com/support/fixcentral/

Un sito WordPress.com.

Su ↑